Part marking guides.
One question per page.
The questions that come up on drawings, RFQs, and travelers, answered at the depth an engineer or quality manager needs and no further. Each guide ends with the tool or service page that puts the answer to work.
- G-074 MIN READ
What Is a CAGE Code
The five-character CAGE code identifies your company in the DoD supply system, and it appears on nearly everything you deliver — inside the IUID Data Matrix, on the UID label, on the MIL-STD-129 box label, and in the drawing title block. This guide covers what it is, how it is formatted, and where it goes.
Read the guide - G-046 MIN READ
What Goes on a MIL-STD-129 Label
MIL-STD-129R tells you what identification goes on a military unit pack and exterior shipping container. This guide walks through each human-readable line, what the PDF417 barcode encodes, the label stock the standard describes, and how the identification label differs from the Military Shipment Label.
Read the guide - G-115 MIN READ
Valve Tag Numbering Conventions
There is no single national valve tag standard; numbering comes from the project specification and the valve schedule. This guide covers the conventions most mechanical specs follow — system abbreviations, numbering by floor or area, normal position — plus tag content, size, material, and what to send when ordering.
Read the guide - G-055 MIN READ
MIL-STD-130 vs MIL-STD-129
Two standards, two surfaces. MIL-STD-130 governs the identification mark on the item itself, including the IUID Data Matrix. MIL-STD-129 governs the labels on the unit pack and the exterior shipping container. This guide separates them, shows where the data overlaps, and lists what a typical delivery needs.
Read the guide - G-105 MIN READ
Laser Marking Before or After Heat Treat
Where marking sits in the router decides whether the code is still there at final inspection. A shallow etch marked before carburizing and shot peen can vanish; an engraving sized for the process survives it; marks applied after heat treat read at full contrast. This guide gives the rules for each process and a decision table.
Read the guide - G-094 MIN READ
Why Laser Marks on Anodized Aluminum Are White
Mark black anodized aluminum with a fiber laser and the result is a bright white legend, not a black one. This guide explains what the laser does to the anodic layer, why clear anodize and bare aluminum behave differently, and the two reliable ways to get a dark mark on aluminum when a drawing calls for it.
Read the guide - G-064 MIN READ
How to Read a UII
A UII looks like one long string, but it is three or four fields concatenated in a fixed order. This guide takes D1A2B3PN-A1234X0001 apart character by character, explains how a reader derives the UII from the Data Matrix, and shows why you cannot always parse one by eye.
Read the guide - G-085 MIN READ
Data Matrix vs QR Code for Part Marking
Both are 2D codes and both can be laser-marked, but they are not interchangeable. Data Matrix is smaller for the same data, tolerates a one-module quiet zone, and is what MIL-STD-130 and most direct part marking standards specify. QR reads on any phone and suits labels and asset tags. This guide compares them and says when each is the right call.
Read the guide - G-037 MIN READ
Laser Annealing vs Etching vs Engraving
Three words that get used interchangeably on drawings describe three different things happening to the metal. Annealing grows an oxide and removes nothing; etching melts a few microns of surface; engraving cuts a recess. This guide covers what each one does, what it costs you in surface integrity, which materials it suits, and how to specify it.
Read the guide - G-015 MIN READ
IUID Construct 1 vs Construct 2
MIL-STD-130 gives you two ways to build a UII. Construct 2 adds the part number and is the usual choice for manufactured parts; Construct 1 relies on a serial that is unique across the whole enterprise. This guide covers what each one is made of, when to pick it, and what it looks like inside the Data Matrix.
Read the guide - G-024 MIN READ
Format 06 vs Format 12 for IUID Marks
Format 06 tags each data element with an ASC MH10.8.2 data identifier; Format 12 uses ATA Spec 2000 text element identifiers. Both produce the same UII. This guide shows the two messages side by side, maps every qualifier, and explains why Format 06 is the default and when Format 12 is called out.
Read the guide